|
그냥 국내 취급점에서 살까 하다가..
그래픽이 마음에 드는 게 없는데다..안 좋은 버릇이 도져서 또 해외구매..
데크 타입은 보시다시피 드랍 쓰루구요.. 그냥 설렁설렁 타다가 나중에 되면 슬라이딩을..할 지 안할지는 모르겠습니다.
확실한건 댄싱은 안 할 것 같아요....
골라 본 데크가 입문용으로 적당할 지 어떨지 한 번 봐주셨으면 하고 올립니다..
번역한 스펙은 아래와 같습니다..
데크
사이즈 : 9.5 X 42인치(약 1미터)
소재 : 메이플 합판 8겹.
공법 : 상온 하이 스피드 핫 프레스 몰딩.
접착제 : 아메리카 스탠다드 그린 타입 I 수용성 무독성 접착제
트럭
사이즈 : 폭 180mm
소재 : T6 알루미늄 합금. T6 열처리 적용.
킹핀 : 고온열처리 합금강
우레탄 쿠션 : 강도 97A, 듀퐁사 제조. 하드타입.
휠
소재 : 고탄력 MDI 폴리우레탄
강도 : 70% 리바운드, 경도 : 83A
베어링
ABEC-9 스케잇보드 베어링. 스피드 크림 윤활액 사용
그립
OS-800 그립 테이프.
DECK
Size: 9.5 × 42 "
Material: 8 plies of sugar maple veneer. Sugar maples are grown up near the North America Great Lakes, being a long-fiber wood, is lightweight and flexible.
Process: High-speed hot-press molding under normal temperature. Less but high-quality water-based glue, lightweight but durable, nice appearance.
Glue: American standard Green Type I water-based non-toxic glue.
TRUCK
Size: 7 inch with Axle width 180mm.
Material: 356-T6 aluminum alloy base plate and hanger under gravity casting heat treatment with T6 process, with quench, aging, cleaning and finishing treatment. The surface is well trimmed, grinded and painted.
Kingpin: Highly tempered steel kingpin, stable and durable.
PU cushion: 97A durometer, made by Dupont MDI high rebound polyurethane, hard type cushion, more stable and is suitable for ABC skateboarders.
WHEELS
Material: High rebound MDI polyurethane elastomers.
Durometer: 70% rebound, hardness 83A.
BEARINGS
ABEC-9 Skateboard special bearing, filling with Speed Cream lubricants.
GRIP
OS-800 grip tape. PVC substrate, adhesive to the board stronger, hard and sharp of silicon carbide.
우리나라에서는 워낙 롱보드씬이 좁아서...
유명한 회사의 제품들(데크, 트럭, 휠..) 위주로 사용이 이루어지고 있습니다;;
아마 속시원한 답을 얻기는 좀 힘들지 않을까 생각합니다;;;;
제가 드릴 수 있는 말씀은..
생산 회사를 알수 없어서 기본적인 품질이 어느정도인지 예상하기가 어려운데요...
그냥 스펙만 봤을 때는 입문으로 타시기에는 나쁘지 않아 보입니다.
차후 슬라이딩 쪽으로 가신다고 하시면.... 데크가 슬라이딩 쪽에 좋은 드랍스루라 연습하시기엔 좋지만..
휠은 기본적으로 바꾸시게 될 듯하고, 트럭도 교체하시게 될 것 같기는 합니다.